Pool table assembly

It's under way at Castle Borepatch.  This is actually the third time I've done this, and it's surprisingly easy to do.  Other than putting the slate on the frame, it's a one man job.*

The trick is levelling the frame before you put the slate on.  When I first bought the table, I watched the guys who set it up and learned their secret - playing cards.  You keep adding cards one or two at a time between the frame and the legs until the whole thing is level.  I have two mason's levels (extra long levels) plus a normal sized one, and so this really didn't take too long.  Then bolt everything together.

I was dumb when I took the table apart at Camp Borepatch, because I folded the felt up.  Yeah, they say to replace the felt when you move the table but this is because most pool tables get moved once in a blue moon.  I only set up the table around 18 months ago, and the felt was brand new.  So I ironed it to get the creases out and it looks fine.

But the design and engineering of a pool table is really straight forward.  All you need to put it together is a ratchet set for the bolts, a screwdriver for the side pieces (and screwing down the slate), and a staple gun to make sure that the felt is taught.

And I didn't need a dining room anyway - actually, both the Queen Of The World and I like having the pool table there instead.

* Needless to say, I did the slate by myself, too.  Not sure that I'll do that again.